User's Guide

• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
In addition, each alarm has the following types:
Regular
Radio transmits an alarm signal and shows audio
and/or visual indicators.
Silent
Radio transmits an alarm signal without any audio or
visual indicators. Radio receives calls without any
sound through the speaker, until the programmed hot
mic transmission period is over and/or you press the
PTT button.
Silent with Voice
Radio transmits an alarm signal without any audio or
visual indicators, but allow incoming calls to sound
through the speaker. If hot mic is enabled, the incoming
calls sound through the speaker after the programmed
hot mic transmission period is over. The indicators only
appear once you press the PTT button.
NOTICE:
Only one of the Emergency Alarms above can be
assigned to the programmed Emergency button.
5.10.20.1
Sending Emergency Alarms
This feature allows you to send an Emergency Alarm, a
non-voice signal, which triggers an alert indication on a
group of radios. Follow the procedure to send Emergency
Alarms on your radio.
Your radio does not display any audio or visual indicators
during Emergency mode when it is set to Silent.
1 Press the programmed Emergency On button.
You see one of these results:
• The display shows Tx Alarms and the
destination alias.
• The display shows Tx Telegram and the
destination alias.
The green LED lights up. The Emergency icon
appears.
English
146