User's Guide
• Negative Indicator Tone sounds.
• Display shows Mute Mode Off.
• The blinking red LED turns off.
• Mute Mode icon disappears from home screen.
• Your radio unmutes and speaker state is restored.
• If the timer has not expired, Mute mode timer is
stopped.
NOTICE:
Mute Mode is also exited if the user transmits voice
or switches to an unprogrammed channel.
5.10.20
Emergency Operation
An Emergency Alarm is used to indicate a critical situation.
You are able to initiate an Emergency at any time even
when there is activity on the current channel.
In Capacity Max, the receiving radio can only support a
single Emergency Alarm at a time. If initiated, a second
Emergency Alarm will override the first alarm.
When an Emergency Alarm is received, the recipient may
choose to either delete the alarm and exit the Alarm List, or
respond to the Emergency Alarm by pressing the PTT
button and transmitting non-emergency voice.
Your dealer or system administrator can set the duration of
a button press for the programmed Emergency button,
except for long press, which is similar with all other buttons:
Short Press
Duration between 0.05 seconds and 0.75 seconds.
Long Press
Duration between 1.00 second and 3.75 seconds.
The Emergency button is assigned with the Emergency
On/Off feature. Check with your dealer for the assigned
operation of the Emergency button.
NOTICE:
If short press the Emergency button is assigned to
turn on the Emergency mode, then long press the
Emergency button is assigned to exit the
Emergency mode.
If long press the Emergency button is assigned to
turn on the Emergency mode, then short press the
Emergency button is assigned to exit the
Emergency mode.
Your radio supports three Emergency Alarms:
• Emergency Alarm
English
145