User's Guide

user when available. Voice communication is not involved
in this feature.
The Call Alert Operation can be configured by the dealer or
the system administrator in two ways:
• The radio is configured to allow you to press the PTT
button to respond directly to the call initiator by making a
Private Call.
• The radio is configured to allow you to press the PTT
button and continue with other Talkgroup
communication. Pressing the PTT button on the call
alert entry will not allow the user to respond to the call
initiator. The user must navigate to the Missed Call Log
option at the Call Log menu and respond to the Call
Alert from there.
An Off Air Call Set-Up (OACSU) private call allows the user
to respond immediately while a Full Off Air Call Set-Up
(FOACSU) private call requires user acknowledgment for
the call. OACSU type calls are therefore, recommended
being used for the Call Alert feature. See Private Call on
page 78.
5.10.17.1
Making Call Alerts
Follow the procedure to make Call Alerts on your radio.
1 Press the programmed One Touch Access button.
The display shows Call Alert and the subscriber
alias or ID. The green LED lights up.
2 Wait for acknowledgment.
If the Call Alert acknowledgment is received, the
display shows a positive mini notice.
If the Call Alert acknowledgment is not received, the
display shows a negative mini notice.
5.10.17.2
Making Call Alerts by Using the
Contacts List
1
Press
to access the menu.
2
Press
or to Contacts. Press to select.
3 Do one of the following:
• Select the subscriber alias or ID directly
English
139