User's Guide

to remotely monitor any audible activity surrounding the
target radio.
Both your radio and the target radio must be programmed
to allow you to use this feature.
If initiated, the green LED blinks once on the target radio.
This feature automatically stops after a programmed
duration or when there is any user operation on the target
radio.
5.10.13.1
Initiating Remote Monitor
Follow the procedure to initiate Remote Monitor on your
radio.
1 Press the programmed Remote Monitor button.
2
Press or to the required alias or ID. Press
to select.
The display shows a transitional mini notice,
indicating the request is in progress. The green LED
lights up.
3 Wait for acknowledgment.
If successful:
• A positive indicator tone sounds.
• The display shows a positive mini notice.
• The audio from the monitored radio starts playing
for a programmed duration, and the display
shows Rem. Monitor. Once the timer expires, an
alert tone sounds, and the LED turns off.
If unsuccessful:
• A negative indicator tone sounds.
• The display shows a negative mini notice.
5.10.13.2
Initiating Remote Monitor by Using the
Contacts List
Follow the procedure to initiate Remote Monitor on your
radio by using the Contacts list.
1
Press
to access the menu.
English
126