User's Guide

6
Press or to Off. Press to select.
When Off is selected, disappears from beside the
talkgroup ID or alias.
5.10.7
Talkback
The Talkback feature allows you to respond to a
transmission while scanning.
If your radio scans into a call from the selectable group
scan list, and if the PTT button is pressed during the
scanned call, the operation of the radio depends on
whether Talkback was enabled or disabled during radio
programming. Check with your dealer or system
administrator for more information.
Talkback Disabled
The radio leaves the scanned call and attempts to
transmit on the contact for the currently selected
channel position. After the Call Hang Time on the
currently selected contact expires, the radio returns to
the home channel and starts the Scan Hang Time
Timer. The radio resumes group scan after its Scan
Hang Time Timer expires.
Talkback Enabled
If the PTT button is pressed during the Group Hang
Time of the scanned call, the radio attempts to transmit
to the scanned group.
NOTICE:
If you scan into a call for a group that is not
assigned to a channel position in the currently
selected zone and the call ends, switch to the
proper zone and then select the channel position of
the group to talk back to that group.
5.10.8
Bluetooth
This feature allows you to use your radio with a Bluetooth-
enabled device (accessory) through a Bluetooth
connection. Your radio supports both Motorola Solutions
and Commercially available Off-The-Shelf (COTS)
Bluetooth-enabled devices.
NOTICE:
This feature is applicable to XPR 7580e IS only.
Bluetooth operates within a range of 10 m (32 ft) line of
sight. This is an unobstructed path between your radio and
your Bluetooth-enabled device. For high degree of
English
107