User's Guide

5.10.1
Call Queue
When there are no resources available to process a call,
Call Queue enables the call request to be placed in the
system queue for the next available resources.
You hear a Call Queue Tone after pressing the PTT button
and radio screen displays Call In Queue indicating that
the radio has entered Call Queue State. The PTT button
may be released once the Call Queue Tone is heard.
If the call setup is successful, the following occur:
• The green LED blinks.
• If enabled, the Talk Permit Tone sounds.
• The display shows the call type icon, ID or alias.
• The radio user has up to 4 seconds to press the PTT
button to begin voice transmission.
If the call setup is unsuccessful, the following occur:
• If enabled, the Reject Tone sounds.
• The display shows the failure notice screen
momentarily.
• The call is terminated and the radio exits the call setup.
5.10.2
Priority Call
Priority Call allows the system to preempt one of the
ongoing non-priority calls and initiate the requested high
priority call when all channels are busy.
With all channels occupied with high priority calls, the
system does not preempt any calls, and places the
requesting high-priority call into call queue. If the system
fails to place the requesting high-priority call into call
queue, it declares failure.
The default settings for Priority Call are preconfigured.
Press the programmable button to toggle between normal
and high priority level. When you use the following
features, the call priority level reverts automatically to the
preconfigured setting.
• All voice calls
• DMR Ⅲ Text Message/Text Message
• Job Ticket
• Remote monitor
The following are the types of Priority Call:
High Priority
The radio displays Next Call: High Priority.
English
101