Owner's Manual
Table Of Contents
- Safety and General Information
- Caution
- Compliance with RF Exposure Standards
- RF Energy Exposure Awareness and Control
- Information and Operational Instructions for General
- Population and Uncontrolled Environment Use
- Operating Instructions
- Acoustic Safety
- Medical Devices
- Holsters Incorporating Magnets
- Operational Warnings
- Potentially Explosive Atmospheres
- Blasting Caps and Blasting Areas
- Batteries
- Do Not Substitute Options or Accessories
- European Union (EU) Waste of Electrical and Electronic Equipment (WEEE) Directive
- Supplier’s Declaration of Conformity
- Notice to Users (FCC and Industry Canada)
- Licensing Information
- Avis aux utilisateurs (FCC et Industrie Canada)
- Renseignements de licence
- Radio Control Buttons
- Radio Display
- Getting Started
- Basic Radio Operations
- Talking and Listening
- Channels and Frequencies
- Warranty
10
English
For maximum clarity, hold the radio 1 in. away from your
mouth and speak directly into the microphone. Do not
cover the microphone while talking.
Talk Range
Your radio is designed to maximize performance and
improve transmission range. Do not use the radios closer
than 5 ft apart.
Push-to-Talk Timeout Timer
To prevent accidental transmissions and save battery life,
the radio emits a continuous warning tone and stops
transmitting if you press the PTT button for 60 s
continuously.
Channel Scan Mode
Channel Scan Mode enables your radio to scan for active
channels. When activity is detected, your radio lands (stays)
on that channel (for two seconds). To transmit on that
channel, press the PTT button. When activity on the landed
channel ends, your radio continues scanning other
channels.
To turn the channel scan on:
1. Press / button two times until icon appears.
2. Press / button to start scanning. Press /
button or PTT button to turn off Scan mode.
Key Lock
1. Press and hold / button until icon appears to lock
the keypad.
2. When in lock mode, you can turn the radio on and off,
adjust the volume, send a call tone, receive, and transmit.
All other functions are locked.
3. Press and hold / button, until icon disappears to
unlock the keypad.
Monitor Mode
Your radio enables you to listen for weak signals on the
current channel.
To turn the Monitor Mode on:
1. Press / button three times until the Channel Monitor
setting flashes and the icon appears.
2. Press the / button for continuous listening. The
icon continues to appears.
To turn the Monitor Mode off:
1. Press / button to return to “Normal” mode. The
icon stops appearing.
T11X.book Page 10 Tuesday, November 26, 2019 3:03 PM