Owner's Manual

9
English
Attaching the Belt Clip
1. Attach the belt clip to the back of the radio until the clip
clicks in place.
2. Attach the belt clip to pocket or belt strap until the clip
clicks in place.
Removing the Belt Clip
1. Pull the release tab on top of the belt clip to release the
latch.
2. Push the belt clip with the other hand towards the top of
radio.
Basic Radio Operations
Read this reference guide completely before attempting to
operate the unit.
Turning Your Radio On/Off
Press and hold the / button to turn your radio
on/off.
Adjusting the Volume
1. Adjust the volume by pressing the and buttons.
2. When the volume reached level 0, the icon appears
permanently on screen.
Adjusting the Sound (Key Beeps)
Your radio emits a beep each time one of the buttons is
pressed (except the PTT button).
Press and hold the button while turning the radio on to
switch the sound off.
To turn this sound on, turn the radio off and on again without
pressing the button.
Selecting a Channel
In order to speak to someone, both your radios must be set
to the same channel.
To select a channel:
1. Press / button until the Channel number starts to
flash.
2. Press or button to the required channel. An
extended press of or button allows you to scroll
through the channel.
3. Press PTT button to confirm the selection or /
button to continue setup.
Talking and Listening
To communicate, all radios in your group must be set to the
same channel.
1. To talk, press and hold the PTT button. When
transmitting, the icon is shown.
2. When you are finished talking, release the PTT button.
3. When receiving, the icon is shown.
T11X.book Page 9 Tuesday, November 26, 2019 3:03 PM