User's Guide
Table Of Contents
- Declaration of Conformity
- Contents
- Important Safety Information
- Notice to Users
- Software Version
- Copyrights
- Computer Software Copyrights
- Introduction
- Basic Operations
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
- Utilities
- Authorized Accessories List
- Batteries and Chargers Warranty
- Limited Warranty
NOTICE:
The radio stops receiving the Broadcast Voice Call if
you switch to a different channel while receiving the
call. You cannot continue with any programmed
button functions until the end of the Broadcast Voice
Call.
Unaddressed Calls
An Unaddressed Call is a group call to one of the 16
predefined group IDs.
This feature is configured using CPS-RM. A contact for one
of the predefined IDs is required to initiate and/or receive
an Unaddressed Call. Check with your dealer or system
administrator for more information.
Making Unaddressed Calls
1 Select a channel with the active group alias or ID.
2 Press the PTT button to make the call.
3 Release the PTT button to listen.
A momentary tone sounds.
4 If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
that the channel is free for you to respond. Press the
PTT button to respond to the call.
The call ends when there is no voice activity for a
predetermined period.
Responding to Unaddressed Calls
When you receive an Unaddressed Call:
• The green LED blinks.
•
A momentary tone sounds.
• Your radio unmutes and the incoming call sounds
through the speaker.
1 Do one of the following:
• If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button,
English
31