User's Guide
Table Of Contents
- Declaration of Conformity
- Contents
- Important Safety Information
- Notice to Users
- Software Version
- Copyrights
- Computer Software Copyrights
- Introduction
- Basic Operations
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
- Utilities
- Authorized Accessories List
- Batteries and Chargers Warranty
- Limited Warranty
the PTT button, indicating the channel is free for you to
use.
You cannot respond to an All Call.
NOTICE:
The radio stops receiving the All Call if you switch to
a different channel while receiving the call. You are
not
able to continue with any programmed button
functions until the end of an All Call.
Broadcast Voice Calls
A Broadcast Voice Call is a one-way voice call from any
user to an entire talkgroup.
The Broadcast Voice Call feature allows only the call
initiating user to transmit to the talkgroup, while the
recipients of the call cannot respond (no Call Hang Time).
Your radio must be programmed to allow you to use this
feature. Check with your dealer or system administrator for
more information.
Making Broadcast Voice Calls
Program your radio to make Broadcast Voice Calls.
1 Select a channel with the active group alias or ID.
2 Press the PTT button to make the call.
The radio returns to the previous menu after the call ends.
Receiving Broadcast Voice Calls
When you receive a Broadcast Voice Call:
• A tone sounds.
•
The green LED blinks.
• Your radio unmutes and the incoming call sounds
through the speaker.
A Broadcast Voice Call does not wait for a predetermined
period before ending.
You cannot respond to a Broadcast Voice Call.
English
30