User's Guide
Table Of Contents
- Declaration of Conformity
- Contents
- Important Safety Information
- Notice to Users
- Software Version
- Copyrights
- Computer Software Copyrights
- Introduction
- Basic Operations
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
- Utilities
- Authorized Accessories List
- Batteries and Chargers Warranty
- Limited Warranty
5
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the PTT
button to respond to the call.
The call ends when there is no voice activity for a
predetermined period.
Responding to Group Calls
To receive a call from a group of users, your radio must be
configured as part of that group. Follow the procedure to
respond to Group Calls on your radio.
When you receive a Group Call:
• The green LED blinks.
•
Your radio unmutes and the incoming call sounds
through the speaker.
1 Do one of the following:
•
If the Channel Free Indication feature is
enabled, you hear a short alert tone the moment
the transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the
PTT button to respond to the call.
•
If the Voice Interrupt feature is enabled, press
the PTT button to interrupt the audio from the
transmitting radio and free the channel for you to
respond.
The green LED lights up.
2 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
3 Release the PTT button to listen.
The call ends when there is no voice activity for a
predetermined period.
English
27