User's Guide
Table Of Contents
- Declaration of Conformity
- Contents
- Important Safety Information
- Notice to Users
- Software Version
- Copyrights
- Computer Software Copyrights
- Introduction
- Basic Operations
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
- Utilities
- Authorized Accessories List
- Batteries and Chargers Warranty
- Limited Warranty
Zone and Channel
Selections
This chapter explains the operations to select a zone or
channel on your radio. A zone is a group of channels.
Your radio supports 1 zone with a maximum of 16
channels.
Each channel can be programmed with different features
and/or support different groups of users.
Selecting Zones
Follow the procedure to select the required zone on your
radio.
Press the programmed Zone Toggle button.
One of the following tone sounds:
Positive Indicator Tone
Radio is in Zone 2.
Negative Indicator Tone
Radio is in Zone 1.
NOTICE:
For all Non-keypad radio, you are
recommended to enable Voice
Announcement feature for selecting zone.
The Voice Announcement feature can only
be enabled through CPS.
Selecting Channels
Follow the procedure to select the required channel on your
radio after you have selected a zone.
Turn the Channel Selector Knob to select the
channel, subscriber ID, or group ID.
English
25