User's Guide
Table Of Contents
- Declaration of Conformity
- Contents
- Important Safety Information
- Notice to Users
- Software Version
- Copyrights
- Computer Software Copyrights
- Introduction
- Basic Operations
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
- Utilities
- Authorized Accessories List
- Batteries and Chargers Warranty
- Limited Warranty
Status Indicators
This chapter explains the status indicators and audio tones
used in the radio.
LED Indicators
LED indicators show the operational status of your radio.
Blinking Red
Radio has failed the self-test upon powering up.
Radio is receiving an emergency transmission.
Radio is transmitting in low battery state.
Radio has moved out of range if Auto-Range
Transponder System is configured.
Solid Green
Radio is powering up.
Radio is transmitting.
Indicates full battery capacity when the programmed
Battery Strength button is pressed.
When pressing the Battery Type button to set the
battery type as NiMH.
Blinking Green
Radio is receiving a call or data.
Radio is detecting activity over the air.
Solid Yellow
Radio is monitoring a conventional channel.
When pressing the Battery Type button to set the
battery type as Li-Ion.
Indicates fair battery charge when programmable button
is pressed.
Blinking Yellow
Radio is scanning for activity.
Radio has yet to respond to a Call Alert.
Radio has Flexible Receive List enabled.
Double Blinking Yellow
Radio is actively searching for a new site.
Radio has yet to respond to a Group Call Alert.
Radio is locked.
English
23