User's Guide
Table Of Contents
- Declaration of Conformity
- Contents
- Important Safety Information
- Notice to Users
- Software Version
- Copyrights
- Computer Software Copyrights
- Introduction
- Basic Operations
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
- Utilities
- Authorized Accessories List
- Batteries and Chargers Warranty
- Limited Warranty
Assignable Settings or Utility
Functions
The following radio settings or utility functions can be
assigned to the programmable buttons.
Tones/Alerts
Toggles all tones and alerts on or off.
Power Level
Toggles transmit power level between high and low.
Squelch
Toggles squelch level between tight and normal.
Push-To-Talk Button
The Push-to-Talk (PTT) button serves two basic purposes:
• While a call is in progress, the PTT button allows the
radio to transmit to other radios in the call. The
microphone is activated when the PTT button is
pressed.
• While a call is not in progress, the PTT button is used to
make a new call.
If the Talk Permit Tone is enabled, wait until the short alert
tone ends before talking.
If the Channel Free Indication feature is enabled on your
radio (programmed by your dealer), you hear a short alert
tone the moment the target radio (the radio that is receiving
your call) releases the PTT button, indicating the channel is
free for you to respond.
You hear a continuous Talk Prohibit Tone if your call is
interrupted. You should release the PTT button if you hear
a continuous Talk Prohibit Tone.
English
22