User's Guide
Table Of Contents
- Declaration of Conformity
- Contents
- Important Safety Information
- Notice to Users
- Software Version
- Copyrights
- Computer Software Copyrights
- Introduction
- Basic Operations
- Radio Controls
- Status Indicators
- Zone and Channel Selections
- Calls
- Advanced Features
- Utilities
- Authorized Accessories List
- Batteries and Chargers Warranty
- Limited Warranty
Powering Up the Radio
Follow the procedure to power up your radio.
Rotate the On/Off/Volume Control Knob clockwise
until a click sounds.
If successful:
• A tone sounds.
• The green LED lights up.
If the Tones/Alerts function is disabled, there is no tone
upon powering up.
Check your battery if your radio does not power up. Make
sure that it is charged and properly attached. Contact your
dealer if your radio still does not power up.
Adjusting the Volume
Follow the procedure to change the volume level of your
radio.
Do one of the following:
• Turn the
On/Off/Volume Control Knob
clockwise to increase the volume.
• Turn the On/Off/Volume Control Knob
counterclockwise to decrease the volume.
English
18