User's Manual Part 1

ManualsBrandsMotorola Solutions ManualsElectronicsHandheld Portable UHF Non-Display fixed antenna

PROGRAMMING THE

RADIO THROUGH THE CPS

English

2. Make sure the radio is turned ON.

3. Once the radio is connected, open the CPS

and select “Read” on the toolbar to get the

radio profile. The CPS allows the user to

change settings, such as General, Audio,

Menu, Channels, Scan List, Customized PL/

DPL, Bluetooth

(*)

, as well as select

frequencies, PL/DPL codes on each

channel.

4. After you change the settings, press “Write”

on the toolbar to save the settings.

For more information on the Computer Programming

Software, please refer to Help menu on the CPS.

Note: (*) CPS Programming Cable (P/N HKKN4025) is an

accessory sold separately. Please contact your

Motorola Point of Purchase for more information.

(*)

Bluetooth is available on selected models only.

Factory Default Settings

Your radio is programmed at the factory to the

following settings:

CLP1013 1W UHF 1 CH Radios Default Settings - BRCAN

Channel

Frequency

Setting

Code

Value

(Hz)

Band

width

(kHz)

1 1 458.6625 67.0 12.5

CLP1043 1W UHF 4 CH Radios Default Settings - BRCAN

Channel

Frequency

Settings