User's Manual
Table Of Contents
- RF ENERGY EXPOSURE AND PRODUCT SAFETY GUIDE FOR PORTABLE TWO-WAY RADIOS
5
English
Two-Way Radio Operation
• Transmit no more than the rated duty factor of 50% of the time. To transmit
(talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT
button. Transmitting 50% of the time, or less, is important because this radio
generates measurable RF energy exposure only when transmitting (in terms of
measuring for standards compliance).
• In front of the face. Hold the radio in a vertical position with the
microphone (and other parts of the radio including the antenna) at
least one inch (2.5 centimeters) away from the nose or lips.
Keeping the radio at a proper distance is important to ensure
compliance.
NOTE: RF exposures decrease with increasing distance from the antenna.
• Body Worn Operation. When worn on the body, always place the radio in a
Motorola-approved clip, holder, holster, case, or body harness for this product.
Using approved body-worn accessories is important because the use of non-
Motorola-approved accessories may result in exposure levels, which exceed
the occupational/controlled environment RF exposure limits.
• Use only Motorola-approved supplied or replacement antennas, batteries, and
audio accessories. Use of non-Motorola-approved antennas, batteries, and
accessories may exceed the applicable RF exposure guidelines (iEEE,
ICNIRP or FCC).
• For a list of Motorola-approved accessories for your radio model, visit the
following website: http://www.motorolasolutions.com/governmentandenterprise
6881095C98-H_SafetyP_Eng.fm Page 5 Tuesday, July 24, 2012 1:43 PM