User's Manual

The LED lights up solid green while the radio is
transmitting and blinks
green rapidly when the radio is
receiving an ongoing privacy-enabled transmission.
Note: Some radio models may not offer this Privacy
feature. Check with your dealer or system
administrator for more information.
Lone Worker
This feature raises an emergency if there is no user
activity, such as any radio button press or activation
of the channel selector, for a predefined time.
Before raising the emergency, when the inactivity
timer expires, the radio warns the user via an audio
indicator.
If there is still no acknowledgement by the user
before the predefined reminder timer expires, the
radio initiates an Emergency Alarm.
Only one of the following Emergency Alarms can be
assigned to this feature:
•
Emergency Alarm
• Emergency Alarm with Call
• Emergency Alarm with Voice to Follow
The radio remains in the emergency state allowing
voice messages to proceed until action is taken. See
Emergency Operation on page 32
on ways to exit
Emergency.
Note: This feature is limited to radios with this
function enabled. Check with your dealer or system
administrator for more information.
Password Lock Features
If enabled, this feature only allows you access your
radio if the correct password is entered upon
powering up.
Accessing the Radio from Password
1 Power up your radio.
You hear a continuous tone.
2 Push the Channel Selector Switch to enter the
first digit of the password.
3 Press Side Button 1
to enter each digit of the
remaining three digits of the password. When the
second digit of the password is entered, your radio
ignores any push of the Channel Selector
Switch. When the last digit of the four-digit
Advanced Features
37
English