Safety Manual
Table Of Contents
- Important Safety Information
- RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios
- RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use
- Federal Communication Commission (FCC) Regulations
- RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations
- Electromagnetic Interference/ Compatibility
- Facilities
- Aircraft
- Medical Devices
- Acoustic Safety
- Operational Warnings
- Operational Cautions
- SL300 Portable Radios Quick Reference Guide
27
English
Sending an Emergency Alarm
Press the programmed Emergency On button. The
display shows ALRM and the destination alias for
display radio.
When an Emergency Alarm acknowledgement is
received, the Emergency tone sounds and the LED
blinks green.
If your radio does not receive an Emergency Alarm
acknowledgement, and after all retries have been
exhausted, a tone sounds.
Radio exits the Emergency Alarm mode.
Voice Announcement
Press the programmed Voice Announcement button
to toggle voice announcement on or off.
MainContent_NAG-LACR.fm Page 27 Friday, September 5, 2014 10:59 AM