Safety Manual
Table Of Contents
- Important Safety Information
- RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios
- RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use
- Federal Communication Commission (FCC) Regulations
- RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations
- Electromagnetic Interference/ Compatibility
- Facilities
- Aircraft
- Medical Devices
- Acoustic Safety
- Operational Warnings
- Operational Cautions
- SL300 Portable Radios Quick Reference Guide
26
English
Starting and Stopping Scan
Press the programmed Scan button.
OR
Use the Channel Rocker for display radio or
Channel Selector Switch for non-display radio to
select a channel programmed with Auto Scan
enabled.
When Scan is enabled, the LED blinks yellow and you
hear a positive indicator tone.
When Scan is disabled, the LED turns off and you
hear a negative indicator tone.
To stop a scan, press the programmed Scan button.
Making a Call Alert
Press the programmed One Touch Access button to
make a Call Alert to the predefined alias or ID. The
display shows ALERT for display radio. The LED lights
up solid green when your radio is sending the Call
Alert.
If the Call Alert acknowledgement is received, a tone
sounds and the display shows positive indicator for
display radio.
If the Call Alert acknowledgement is not received, a
tone sounds and the display shows negative indicator
for display radio.
MainContent_NAG-LACR.fm Page 26 Friday, September 5, 2014 10:59 AM