Safety Manual
Table Of Contents
- Important Safety Information
- RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios
- RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use
- Federal Communication Commission (FCC) Regulations
- RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations
- Electromagnetic Interference/ Compatibility
- Facilities
- Aircraft
- Medical Devices
- Acoustic Safety
- Operational Warnings
- Operational Cautions
- SL300 Portable Radios Quick Reference Guide
24
English
Making a Private Call
NOTE: Your radio must be programmed for you to
initiate a Private Call.
Follow the procedure below.
1. Select the channel with the active subscriber alias
or ID.
OR
Press the programmed One Touch Access but-
ton.
2. Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3. Press the PTT button to make the call. The LED
lights up solid green. The display shows the
subscriber alias or ID for display radio.
4. Wait for the Talk Permit Tone to finish (if enabled).
5. Speak clearly into the microphone.
6. Release the PTT button to listen. When the target
radio responds, the LED blinks green.
7. If the Channel Free Indication feature is
enabled, you hear a short alert tone the moment
the transmitting radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond.
OR
If there is no voice activity for a predetermined
period of time, the call ends. You hear a short tone.
MainContent_NAG-LACR.fm Page 24 Friday, September 5, 2014 10:59 AM