Safety Manual
Table Of Contents
- Important Safety Information
- RF Energy Exposure and Product Safety Guide for Portable Two-Way Radios
- RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use
- Federal Communication Commission (FCC) Regulations
- RF Exposure Compliance and Control Guidelines and Operating Instructions for Two-Way Radio Operations
- Electromagnetic Interference/ Compatibility
- Facilities
- Aircraft
- Medical Devices
- Acoustic Safety
- Operational Warnings
- Operational Cautions
- SL300 Portable Radios Quick Reference Guide
22
English
3. Press Side Button 1 to enter each digit of the
remaining three digits of the password. You hear a
positive indicator tone for each Side Button 1
press. When the second digit of the password is
entered, your radio ignores any push of the
Channel Rocker.
4. When the last digit of the four-digit password is
entered, your radio automatically checks the
validity of the password. If the password is correct,
your radio proceeds to power up.
OR
If the password is incorrect, you hear a continuous
tone. Repeat Steps 1 to 3.
Selecting a Channel
Push the Channel Rocker for display radio or
Channel Selector Switch for non-display radio to
select the channel.
Making a Group Call
Follow the procedure below.
1. Select the channel.
OR
Press the programmed One Touch Access
button.
2. Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
MainContent_NAG-LACR.fm Page 22 Friday, September 5, 2014 10:59 AM