User's Guide

Note:
If the Privacy feature is enabled on a channel, you
can make privacy-enabled Group Call, Private Call,
and All Call on that channel. Only target radios with
the same Privacy Key OR the same Key Value and
Key ID as your radio will be able to unscramble the
transmission.
See Privacy on page 111 for more information.
Additionally, Contacts menu allows you to assign
each entry to a programmable number key or more
on a keypad. If an entry is assigned to a number key,
your radio can perform a quick dial on the entry.
Your radio supports maximum of 1000 Contact list
entries.
Each entry within Contacts displays the following
information:
— Call Type
— Call Alias
— Call ID
Note:
You can add or edit subscriber IDs for the Digital
Contacts list.
Making a Group Call from Contacts
1
to access the menu.
2
or to Contacts and press to select.
The entries are alphabetically sorted.
3
or to the required group alias or ID.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
5 Press the PTT button to make the call.
The LED lights up solid green. The first line
displays the subscriber alias or ID. The second
line displays Private Call and the Private Call
icon
6 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
7 Release the PTT button to listen.
When any user in the group responds, the LED
blinks green, the display shows the transmitting
user's ID, the radio unmutes and the response
sounds through the radio's speaker.
Advanced Features in Non-Connect...
71
English