User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Notes
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Handling Precautions
- RF Energy Exposure and Product Safety Guidelines and Instructions
- Notes
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Additional Radio Controls in Non-Connect Plus Mode
- Making and Receiving Calls
- Advanced Features in Non-Connect Plus Mode
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Contact Settings
- Making a Group Call from Contacts
- Making a Private Call from Contacts
- Making a Phone Call from Contacts
- Making a Call Alias Search
- Making a Group, Private, Phone or All Call by Alias Search
- Assigning an Entry to a Programmable Number Key
- Removing the Association between Entry and Programmable Number Key
- Adding a New Contact
- Sending a Message to a Contact
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- All Tones
- Ring Alert Type Selection
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Job Tickets
- Privacy
- Covert Mode
- Dual Tone Multi Frequency (DTMF)
- Multi-Site Controls
- Security
- Lone Worker
- Password Lock Features
- Bluetooth Operation
- Notification List
- Over-the-Air-Programming (OTAP)
- Utilities
- Locking and Unlocking the Keypad
- Turning Keypad Tones On or Off
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Controlling the Display Backlight
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Setting the Text Message Alert Tone
- Changing the Display Mode
- Adjusting the Display Brightness
- Wallpaper Mode
- Screen Saver Mode
- Audio Accessory
- Auto Keypad Lock
- Language
- Turning the LED Indicator On or Off
- Voice Announcement
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Text Entry Configuration
- Flexible Receive List
- Accessing General Radio Information
- RSSI Values
- Additional Radio Controls in Connect Plus Mode
- Making and Receiving Calls in Connect Plus Mode
- Advanced Features in Connect Plus Mode
- Auto Fallback
- Radio Check
- Remote Monitor
- Scan
- User Configurable Scan
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Privacy
- Security
- Password Lock Features
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Turning Keypad Tones On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Changing the Display Mode
- Adjusting the Display Brightness
- Controlling the Display Backlight
- Locking and Unlocking the Keypad
- Language
- Turning the LED Indicator On or Off
- Identifying Cable Type
- Voice Announcement
- Wallpaper Mode
- Screen Saver Mode
- Audio Accessory
- Auto Keypad Lock
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Text Entry Configuration
- Accessing General Radio Information
- Accessing the Battery Information
- Checking the Degree of Tilt (Accelerometer)
- Checking the Radio Model Number Index
- Checking the CRC of the Option Board OTA Codeplug File
- Displaying the Site ID (Site Number)
- Checking the Site Info
- Checking the Radio ID
- Checking the Firmware Version and Codeplug Version
- Checking for Updates
- Accessories
- Batteries and Chargers Warranty
- Limited Warranty
3 Press the PTT button to initiate a voice
transmission on the Emergency group.
When you release the PTT button, the Emergency
call continues for the time allotted for the
Emergency Call Hang Time.
If you press the PTT button during this time, the
Emergency call continues.
Initiating an Emergency Call with Voice to Follow
Your radio must be programmed for this type of
operation.
When enabled for this operation, when you press the
programmed Emergency button, and when your
radio receives the time slot assignment, the
microphone is automatically activated without
pressing the PTT button. This activated microphone
state is also known as “hot mic”. The “hot mic” applies
to the first voice transmission from your radio during
the Emergency call. For subsequent transmissions in
the same Emergency call, you must press the PTT
button.
1 Press the programmed Emergency button.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 The microphone remains active for the “hot mic”
time specified in your radio's codeplug
programming.
During this time, the LED lights up green.
4 Press and hold the PTT button to talk longer than
the programmed duration.
Initiating an Emergency Alert
Note: If your radio is programmed for “Silent” or
“Silent with Voice”, it will not provide any audio or
visual indications that it is sending an Emergency
Alert. If programmed for “Silent”, the silent operation
continues indefinitely until you press PTT or the
button configured for “Emergency Off”. If programmed
for “Silent with Voice”, the radio automatically cancels
silent operation when the site controller broadcasts
the Emergency Alert.
Press the orange Emergency button.
Upon transmitting the Emergency Alert to the site
controller, the radio’s display shows the
Advanced Features in Connect Plus...
190
English