User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Notes
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Handling Precautions
- RF Energy Exposure and Product Safety Guidelines and Instructions
- Notes
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Additional Radio Controls in Non-Connect Plus Mode
- Making and Receiving Calls
- Advanced Features in Non-Connect Plus Mode
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Contact Settings
- Making a Group Call from Contacts
- Making a Private Call from Contacts
- Making a Phone Call from Contacts
- Making a Call Alias Search
- Making a Group, Private, Phone or All Call by Alias Search
- Assigning an Entry to a Programmable Number Key
- Removing the Association between Entry and Programmable Number Key
- Adding a New Contact
- Sending a Message to a Contact
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- All Tones
- Ring Alert Type Selection
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Job Tickets
- Privacy
- Covert Mode
- Dual Tone Multi Frequency (DTMF)
- Multi-Site Controls
- Security
- Lone Worker
- Password Lock Features
- Bluetooth Operation
- Notification List
- Over-the-Air-Programming (OTAP)
- Utilities
- Locking and Unlocking the Keypad
- Turning Keypad Tones On or Off
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Controlling the Display Backlight
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Setting the Text Message Alert Tone
- Changing the Display Mode
- Adjusting the Display Brightness
- Wallpaper Mode
- Screen Saver Mode
- Audio Accessory
- Auto Keypad Lock
- Language
- Turning the LED Indicator On or Off
- Voice Announcement
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Text Entry Configuration
- Flexible Receive List
- Accessing General Radio Information
- RSSI Values
- Additional Radio Controls in Connect Plus Mode
- Making and Receiving Calls in Connect Plus Mode
- Advanced Features in Connect Plus Mode
- Auto Fallback
- Radio Check
- Remote Monitor
- Scan
- User Configurable Scan
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Privacy
- Security
- Password Lock Features
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Turning Keypad Tones On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Changing the Display Mode
- Adjusting the Display Brightness
- Controlling the Display Backlight
- Locking and Unlocking the Keypad
- Language
- Turning the LED Indicator On or Off
- Identifying Cable Type
- Voice Announcement
- Wallpaper Mode
- Screen Saver Mode
- Audio Accessory
- Auto Keypad Lock
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Text Entry Configuration
- Accessing General Radio Information
- Accessing the Battery Information
- Checking the Degree of Tilt (Accelerometer)
- Checking the Radio Model Number Index
- Checking the CRC of the Option Board OTA Codeplug File
- Displaying the Site ID (Site Number)
- Checking the Site Info
- Checking the Radio ID
- Checking the Firmware Version and Codeplug Version
- Checking for Updates
- Accessories
- Batteries and Chargers Warranty
- Limited Warranty
automatically exits silent operation after the
Emergency Call or Emergency Alert is finished. The
exception to this rule is when “Emergency Alert” is the
configured Emergency Mode and “Silent” is the
configured Emergency Type. If your radio is
programmed in this manner, the silent operation
continues until you cancel silent operation by
pressing PTT or the button configured for
“Emergency Off”.
Emergency voice calls and Emergency Alerts are not
supported when operating in Connect Plus Auto
Fallback mode. For more information see the Auto
Fallback on page 170.
An Emergency Alert is used to indicate a critical
situation. You can initiate an Emergency at any time
on any screen display, even when there is activity on
the current channel. Pressing the Emergency button
initiates the programmed Emergency mode. The
programmed Emergency mode may also be initiated
by triggering the optional Man Down feature. The
Emergency feature may be disabled in your radio.
Your dealer can set the duration of a button press for
the programmed Emergency button, except for long
press, which is similar with all other buttons:
— Short press – Between 0.05 seconds and 0.75
seconds.
— Long press – Between 1.00 second and 3.75
seconds.
The Emergency button is assigned with the
Emergency On/Off feature. Check with your dealer for
the assigned operation of the Emergency button.
— If short Emergency button short press is assigned
to Emergency On, then Emergency button long
press is assigned to Emergency Off.
— If Emergency button short press is assigned to
Emergency On, then Emergency button short
press is assigned to Emergency Off.
When your radio is selected to a Connect Plus zone,
it supports three Emergency modes:
— Emergency Call – You must press the PTT button
to talk on the assigned emergency time slot.
— Emergency Call with Voice to Follow – For the
first transmission on the assigned emergency time
slot, the microphone is automatically unmuted and
you may talk without pressing the PTT button. The
microphone stays “hot” in this fashion for a time
period programmed into the radio. For subsequent
Advanced Features in Connect Plus...
186
English