User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Notes
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Handling Precautions
- RF Energy Exposure and Product Safety Guidelines and Instructions
- Notes
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Additional Radio Controls in Non-Connect Plus Mode
- Making and Receiving Calls
- Advanced Features in Non-Connect Plus Mode
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Contact Settings
- Making a Group Call from Contacts
- Making a Private Call from Contacts
- Making a Phone Call from Contacts
- Making a Call Alias Search
- Making a Group, Private, Phone or All Call by Alias Search
- Assigning an Entry to a Programmable Number Key
- Removing the Association between Entry and Programmable Number Key
- Adding a New Contact
- Sending a Message to a Contact
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- All Tones
- Ring Alert Type Selection
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Job Tickets
- Privacy
- Covert Mode
- Dual Tone Multi Frequency (DTMF)
- Multi-Site Controls
- Security
- Lone Worker
- Password Lock Features
- Bluetooth Operation
- Notification List
- Over-the-Air-Programming (OTAP)
- Utilities
- Locking and Unlocking the Keypad
- Turning Keypad Tones On or Off
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Controlling the Display Backlight
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Setting the Text Message Alert Tone
- Changing the Display Mode
- Adjusting the Display Brightness
- Wallpaper Mode
- Screen Saver Mode
- Audio Accessory
- Auto Keypad Lock
- Language
- Turning the LED Indicator On or Off
- Voice Announcement
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Text Entry Configuration
- Flexible Receive List
- Accessing General Radio Information
- RSSI Values
- Additional Radio Controls in Connect Plus Mode
- Making and Receiving Calls in Connect Plus Mode
- Advanced Features in Connect Plus Mode
- Auto Fallback
- Radio Check
- Remote Monitor
- Scan
- User Configurable Scan
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Privacy
- Security
- Password Lock Features
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Turning Keypad Tones On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Changing the Display Mode
- Adjusting the Display Brightness
- Controlling the Display Backlight
- Locking and Unlocking the Keypad
- Language
- Turning the LED Indicator On or Off
- Identifying Cable Type
- Voice Announcement
- Wallpaper Mode
- Screen Saver Mode
- Audio Accessory
- Auto Keypad Lock
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Text Entry Configuration
- Accessing General Radio Information
- Accessing the Battery Information
- Checking the Degree of Tilt (Accelerometer)
- Checking the Radio Model Number Index
- Checking the CRC of the Option Board OTA Codeplug File
- Displaying the Site ID (Site Number)
- Checking the Site Info
- Checking the Radio ID
- Checking the Firmware Version and Codeplug Version
- Checking for Updates
- Accessories
- Batteries and Chargers Warranty
- Limited Warranty
—
or to Manual Dial and press to
select.
— If there was previously dialed ID, the ID
appears along with a blinking cursor. Use
the keypad to edit/enter the ID. Press to
select.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
5 Press the PTT button to make the call.
The LED lights up solid green. .
6 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
7 Release the PTT button to listen.
When the target radio responds, the LED blinks
green and the display shows the transmitting
user's ID.
If there is no voice activity for a predetermined
period of time, the call ends.
You hear a short tone. The display shows Call
Ended.
Making a Call Alias Search
You can also use alias or alphanumeric search to
retrieve the required subscriber alias.
This feature is only applicable while in Contacts.
1
to access the menu.
2
or to Contacts and press to select.
The entries are alphabetically sorted.
3 Key in the first character of the required alias, and
then press or to locate the required alias.
4 Use the keypad to type the required alias.
Press to move one space to the left. Press to
move one space to the right. Press the key
to delete any unwanted characters. Long press
to change text entry method.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
6 Press the PTT button to make the call.
Advanced Features in Connect Plus...
178
English