User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Notes
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Handling Precautions
- RF Energy Exposure and Product Safety Guidelines and Instructions
- Notes
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Additional Radio Controls in Non-Connect Plus Mode
- Making and Receiving Calls
- Advanced Features in Non-Connect Plus Mode
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Contact Settings
- Making a Group Call from Contacts
- Making a Private Call from Contacts
- Making a Phone Call from Contacts
- Making a Call Alias Search
- Making a Group, Private, Phone or All Call by Alias Search
- Assigning an Entry to a Programmable Number Key
- Removing the Association between Entry and Programmable Number Key
- Adding a New Contact
- Sending a Message to a Contact
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- All Tones
- Ring Alert Type Selection
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Job Tickets
- Privacy
- Covert Mode
- Dual Tone Multi Frequency (DTMF)
- Multi-Site Controls
- Security
- Lone Worker
- Password Lock Features
- Bluetooth Operation
- Notification List
- Over-the-Air-Programming (OTAP)
- Utilities
- Locking and Unlocking the Keypad
- Turning Keypad Tones On or Off
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Controlling the Display Backlight
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Setting the Text Message Alert Tone
- Changing the Display Mode
- Adjusting the Display Brightness
- Wallpaper Mode
- Screen Saver Mode
- Audio Accessory
- Auto Keypad Lock
- Language
- Turning the LED Indicator On or Off
- Voice Announcement
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Text Entry Configuration
- Flexible Receive List
- Accessing General Radio Information
- RSSI Values
- Additional Radio Controls in Connect Plus Mode
- Making and Receiving Calls in Connect Plus Mode
- Advanced Features in Connect Plus Mode
- Auto Fallback
- Radio Check
- Remote Monitor
- Scan
- User Configurable Scan
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Privacy
- Security
- Password Lock Features
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Turning Keypad Tones On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Changing the Display Mode
- Adjusting the Display Brightness
- Controlling the Display Backlight
- Locking and Unlocking the Keypad
- Language
- Turning the LED Indicator On or Off
- Identifying Cable Type
- Voice Announcement
- Wallpaper Mode
- Screen Saver Mode
- Audio Accessory
- Auto Keypad Lock
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Text Entry Configuration
- Accessing General Radio Information
- Accessing the Battery Information
- Checking the Degree of Tilt (Accelerometer)
- Checking the Radio Model Number Index
- Checking the CRC of the Option Board OTA Codeplug File
- Displaying the Site ID (Site Number)
- Checking the Site Info
- Checking the Radio ID
- Checking the Firmware Version and Codeplug Version
- Checking for Updates
- Accessories
- Batteries and Chargers Warranty
- Limited Warranty
ID as your currently selected zone. It is important to
note that even when the Scan feature is turned on via
this procedure, scan may still be disabled for some
(or all) groups on your scan list. See Editing the Scan
List on page 175 for more information.
You can start and stop scanning by pressing the
programmed Scan button OR follow the procedure
described next.
1
to access the menu.
2
or to Scan and press to select.
3
or to Turn On or Turn Off and press
to select.
—
The display shows Scan On if scan is disabled.
—
The display shows Scan Off if scan is
enabled.
Responding to a Transmission During a Scan
During scanning, your radio stops on a channel/group
where activity is detected. The radio stays on that
channel for a programmed time period known as
“hang time”.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
2 Press the PTT button during hang time.
The LED lights up solid green.
3 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
4 Release the PTT button to listen.
If you do not respond within the hang time, the
radio returns to scanning other groups.
User Configurable Scan
If the Edit List menu is enabled, a user is able to Add
and Remove the scan members from the Add
Member menu. A Scan List member must be a
regular Group Contact (i.e. not Multi-group or Site All
Call/Network Wide All Call) that is currently assigned
to a Channel Selector position in a Connect Plus
Zone with the same Network ID as the currently
selected Zone. The Talkgroup's Alias must also not
match any Talkgroup that is already included in the
current Zone's Scan List.
Advanced Features in Connect Plus...
174
English