User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Notes
- Important Safety Information
- Software Version
- Computer Software Copyrights
- Handling Precautions
- RF Energy Exposure and Product Safety Guidelines and Instructions
- Notes
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Additional Radio Controls in Non-Connect Plus Mode
- Making and Receiving Calls
- Advanced Features in Non-Connect Plus Mode
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Contact Settings
- Making a Group Call from Contacts
- Making a Private Call from Contacts
- Making a Phone Call from Contacts
- Making a Call Alias Search
- Making a Group, Private, Phone or All Call by Alias Search
- Assigning an Entry to a Programmable Number Key
- Removing the Association between Entry and Programmable Number Key
- Adding a New Contact
- Sending a Message to a Contact
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- All Tones
- Ring Alert Type Selection
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Job Tickets
- Privacy
- Covert Mode
- Dual Tone Multi Frequency (DTMF)
- Multi-Site Controls
- Security
- Lone Worker
- Password Lock Features
- Bluetooth Operation
- Notification List
- Over-the-Air-Programming (OTAP)
- Utilities
- Locking and Unlocking the Keypad
- Turning Keypad Tones On or Off
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Controlling the Display Backlight
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Setting the Text Message Alert Tone
- Changing the Display Mode
- Adjusting the Display Brightness
- Wallpaper Mode
- Screen Saver Mode
- Audio Accessory
- Auto Keypad Lock
- Language
- Turning the LED Indicator On or Off
- Voice Announcement
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Text Entry Configuration
- Flexible Receive List
- Accessing General Radio Information
- RSSI Values
- Additional Radio Controls in Connect Plus Mode
- Making and Receiving Calls in Connect Plus Mode
- Advanced Features in Connect Plus Mode
- Auto Fallback
- Radio Check
- Remote Monitor
- Scan
- User Configurable Scan
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Privacy
- Security
- Password Lock Features
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Turning Keypad Tones On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Changing the Display Mode
- Adjusting the Display Brightness
- Controlling the Display Backlight
- Locking and Unlocking the Keypad
- Language
- Turning the LED Indicator On or Off
- Identifying Cable Type
- Voice Announcement
- Wallpaper Mode
- Screen Saver Mode
- Audio Accessory
- Auto Keypad Lock
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Text Entry Configuration
- Accessing General Radio Information
- Accessing the Battery Information
- Checking the Degree of Tilt (Accelerometer)
- Checking the Radio Model Number Index
- Checking the CRC of the Option Board OTA Codeplug File
- Displaying the Site ID (Site Number)
- Checking the Site Info
- Checking the Radio ID
- Checking the Firmware Version and Codeplug Version
- Checking for Updates
- Accessories
- Batteries and Chargers Warranty
- Limited Warranty
Making a Call with the Channel Selector Knob
Making a Group Call
To make a call to a group of users, your radio must
be configured as part of that group.
1 Select the channel with the active group alias or
ID. See Selecting a Call Type on page 163.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green. The Group Call
icon appears in the top right corner. The first text
line shows the group call alias.
4 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
5 Release the PTT button to listen.
When the target radio responds, the LED blinks
green, the radio unmutes and the response
sounds through the radio’s speaker. You see the
Group Call icon, the group alias or ID, and
transmitting radio alias or ID on your display.
If there is no voice activity for a predetermined
period of time, the call ends. Radio returns to the
screen you were on prior to initiating the call.
Making a Private Call
While you can receive and/or respond to a Private
Call initiated by an authorized individual radio, your
radio must be programmed for you to initiate a Private
Call.
You will hear a negative indicator tone, when you
make a Private Call via the Contacts list, Call Log,
One Touch Access button, or the Channel Selector
Knob, if this feature is not enabled.
Use the Text Message or Call Alert features to
contact an individual radio. See Text Message
Features on page 191 or Call Alert Operation on
page 87 for more information.
1 Do one of the following.
— Select the channel with the active subscriber
alias or ID. See Selecting a Call Type on page
163.
— Press the programmed One Touch Access
button.
Making and Receiving Calls in Connect...
166
English