Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- XPR 7150 Series Digital Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Carry Holster
- Attaching the Universal Connector Cover (Dust Cover)
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Zone
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Phone Call
- Scanning Channels
- Making a Call Alert
- Sending an Emergency Alarm
- Bluetooth® Operation
31
English
Bluetooth
®
Operation
Turning Bluetooth On or Off
1. Turn on your Bluetooth-enabled device and place
it in pairing mode. Refer to respective Bluetooth-
enabled device’s user manual.
2. On your radio, press the programmed Bluetooth
Connect button.
3. A tone sounds and LED blinks yellow.
4. Your Bluetooth-enabled device may require
additional steps to complete the pairing. Refer to
respective Bluetooth-enabled device’s user
manual.
5. If successful, a positive tone sounds.
OR
If unsuccessful, a negative indicator tone sounds.
Do not turn off your Bluetooth-enabled device during
the finding and connecting operation as this cancels
the operation.
Your radio connects to the Bluetooth-enabled device
within range with either the strongest signal strength,
or to one which it has connected to before in a prior
session.
NOTE: A pin code may be required to be
programmed in your radio before it can pair
with some devices. Contact your dealer for
more information.
LACR-NAG-QRG.fm Page 31 Wednesday, April 24, 2013 11:47 AM