Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- XPR 7150 Series Digital Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Carry Holster
- Attaching the Universal Connector Cover (Dust Cover)
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Zone
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Phone Call
- Scanning Channels
- Making a Call Alert
- Sending an Emergency Alarm
- Bluetooth® Operation
30
English
Making a Call Alert
1. Press the programmed One Touch Access
button to make a Call Alert to the predefined ID.
2. The LED lights up solid green when your radio is
sending the Call Alert.
3. If the Call Alert acknowledgement is received, two
chirps sound.
OR
If the Call Alert acknowledgement is not received,
a low-pitched tone sounds.
Sending an Emergency Alarm
NOTE: If your radio is set to Silent, it will not display
any audio or visual indicators during
Emergency mode.
1. Press the programmed Emergency On button.
2. The LED lights up solid green.
LACR-NAG-QRG.fm Page 30 Wednesday, April 24, 2013 11:47 AM