Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- XPR 7150 Series Digital Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Carry Holster
- Attaching the Universal Connector Cover (Dust Cover)
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Zone
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Phone Call
- Scanning Channels
- Making a Call Alert
- Sending an Emergency Alarm
- Bluetooth® Operation
29
English
Making a Phone Call
1. Press the programmed Phone button.
2. The LED lights up solid green.
3. You hear the dialing tone of the telephone user.
4. Hold the radio vertically 1 to 2 inches
(2.5 to 5.0 cm) from your mouth.
5. Press the PTT button to talk and release it to
listen.
6. If the Channel Free Indication feature is enabled,
you will hear a short alert tone the moment the
target radio releases the PTT button, indicating the
channel is free for you to respond. Press the PTT
button to respond.
OR
If there is no voice activity for a predetermined
period or time, the call ends.
7. You hear a short tone.
Scanning Channels
NOTE: This feature is not applicable in Capacity Plus
and Linked Capacity Plus.
Press the programmed Scan button to turn scan on or
off.
During scan, the LED blinks yellow and you hear a
positive indicator tone
.
LACR-NAG-QRG.fm Page 29 Wednesday, April 24, 2013 11:47 AM