Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- XPR 7150 Series Digital Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Carry Holster
- Attaching the Universal Connector Cover (Dust Cover)
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Zone
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Phone Call
- Scanning Channels
- Making a Call Alert
- Sending an Emergency Alarm
- Bluetooth® Operation
27
English
4. Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
OR
Wait for the PTT Sidetone to finish (if enabled)
and speak clearly into the microphone.
5. Release the PTT button to listen.When the target
radio responds, the LED blinks green.
6. If the Channel Free Indication feature is
enabled, you will hear a short alert tone the
moment the target radio releases the PTT button,
indicating the channel is free for you to respond.
Press the PTT button to respond.
OR
If there is no voice activity for a predetermined
period of time, the call ends.
Making a Private Call
1. Turn the Channel Selector Knob to select the
channel with the active subscriber alias or ID.
2. Hold the radio vertically 1 to 2 inches
(2.5 to 5.0 cm) from your mouth.
3. Press the PTT button to make the call. The LED
lights up solid green.
4. Wait for the Talk Permit Tone to finish (if enabled)
and speak clearly into the microphone.
5. Release the PTT button to listen. When the target
radio responds, the LED blinks green.
LACR-NAG-QRG.fm Page 27 Wednesday, April 24, 2013 11:47 AM