Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- XPR 7150 Series Digital Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Carry Holster
- Attaching the Universal Connector Cover (Dust Cover)
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Zone
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Phone Call
- Scanning Channels
- Making a Call Alert
- Sending an Emergency Alarm
- Bluetooth® Operation
25
English
4. Press Side Button 1 or 2 to enter each digit of the
remaining three digits of the password. You hear a
positive indicator tone for each Side Button press.
When the second digit of the password is entered,
your radio ignores any Channel Selector Knob
position change.
5. When the last digit of the four-digit password is
entered, your radio automatically checks the
validity of the password.
If the password is correct:
Your radio proceeds to power up. See Powering
Up the Radio on page 24.
OR
If the password is incorrect:
You hear a continuous tone. Repeat Steps 1 to 3.
OR
After the third incorrect password, your radio
enters into locked state. A tone sounds and the
LED double blinks yellow.
Your radio enters into locked state for 15 minutes, and
responds to inputs from On/Off/Volume Control
Knob.
NOTE: Please see User Guide for details on
Unlocking Radio from Locked State.
LACR-NAG-QRG.fm Page 25 Wednesday, April 24, 2013 11:47 AM