Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- XPR 7150 Series Digital Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Carry Holster
- Attaching the Universal Connector Cover (Dust Cover)
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Zone
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Phone Call
- Scanning Channels
- Making a Call Alert
- Sending an Emergency Alarm
- Bluetooth® Operation
23
English
Attaching the Universal Connector
Cover (Dust Cover)
The universal connector is located on the antenna
side of the radio. It is used to connect MOTOTRBO
accessories to the radio.
1. Insert the slanted end
of the cover into the
slots above the
universal connector.
2. Press downwards on
the cover to seat the
dust cover properly
on the Universal
Connector.
3. Secure the dust cover
to the radio by
pushing the latch
upwards.
To remove the dust
cover, push the latch
downwards. Lift the
cover up and slide down
the dust cover from the
universal connector to
remove it.
Replace the dust cover
when the universal
connector is not in use.
1
2
3
LACR-NAG-QRG.fm Page 23 Wednesday, April 24, 2013 11:47 AM