Safety Guide
Table Of Contents
- RF Energy Exposure and Product Safety for Portable Two-Way Radios
- XPR 7150 Series Digital Portable Radios Quick Reference Guide
- Radio Controls
- LED Indicator
- Charging the Battery
- Attaching the Battery
- Attaching the Antenna
- Attaching the Carry Holster
- Attaching the Universal Connector Cover (Dust Cover)
- Powering Up the Radio
- Adjusting the Volume
- Accessing the Radio from Password
- Selecting a Zone
- Selecting a Channel
- Making a Group Call
- Making a Private Call
- Making an All Call
- Making a Phone Call
- Scanning Channels
- Making a Call Alert
- Sending an Emergency Alarm
- Bluetooth® Operation
13
English
A modification changes the unit’s hardware from its
original design configuration. Modifications can only
be made by the original product manufacturer.
• DO NOT replace or change
accessories in a hazardous
atmosphere. Contact sparking may
occur while installing or removing
accessories and cause an explosion
or fire.
• Turn the radio off before removing or
installing a battery or accessory.
• DO NOT disassemble an intrinsically
safe product in any way that
exposes the internal circuits of the
unit.
• Failure to use an intrinsically safe
approved battery or Approved
accessories specifically approved
for the radio unit may result in the
dangerously unsafe condition of an
unapproved radio combination
being used in a hazardous location
• Unauthorized or incorrect
modification of the intrinsically safe
approved Product will negate the
approval rating of the product.
W A R N I N G
LACR-NAG-QRG.fm Page 13 Wednesday, April 24, 2013 11:47 AM