User's Manual
Table Of Contents
- Contents
- Safety
- Introduction
- Batteries and Chargers Safety Information
- FCC Licensing Information
- Radio Overview
- Getting Started
- Programming Features
- Troubleshooting
- Use and Care
- Frequency and Code Charts
- Motorola Limited Warranty for the United States and Canada
- Accessories
- RM Series Features Summary
- Programmable Buttons Chart
- Blank Page
- Blank Page
- Blank Page
91
Scan Yes Yes N/A N/A SB2 Button Short press SB2 to enable/disable scan.
Multiple (16)
Scan Lists
Yes No Ye s Yes
ON - All
Channels
Use CPS for editing Scan Lists (adding/removing
channels to be scanned). For display models only:
you can add/delete channels in the scan lists
using front panel by going into Adv. Config. mode.
Mode(1).
Scan, Auto
Scan
No Yes No Yes OFF
Feature available only for Non Display Models. For
front programming using front panel radio enter in
Advanced Configuration Mode(1)
Scramble (4) Yes No Ye s Yes
O F F
(level 0)
Display models: you can program scramble
using front panel by going into Advanced
Configuration Mode(1). Non-display model you
need to program an SBx.
Time-Out
Timer
No No Yes Yes 60 seconds
Use CPS to program to program how long the PTT
can be pressed before the transmission is
automatically terminated. Values are 60, 120 and
180 seconds. (Pressing again PTT will start the
transmission again).
Features
Programmable Via
Advanced Conf.
Programmable via
CPS
Default Value Programming Tips
Display
Non-
Display
Display
Non-
Display