User's Manual
Table Of Contents
- Contents
- Safety
- Introduction
- Batteries and Chargers Safety Information
- FCC Licensing Information
- Radio Overview
- Getting Started
- Programming Features
- Troubleshooting
- Use and Care
- Frequency and Code Charts
- Motorola Limited Warranty for the United States and Canada
- Accessories
- RM Series Features Summary
- Programmable Buttons Chart
- Blank Page
- Blank Page
- Blank Page
89
Nuisance Ch
Delete (4)
Yes Yes Yes Yes SB2 Button
Press SB2 to start scanning and wait until the radio
lands on the channel you want to delete. Long press
SB2 to delete the channel.
Note: The nuisance deleted channel will be restored
into the scan list when the radio is turned OFF or
you exit SCAN.
PL Defeat Yes Yes Yes Ye s SB1 Button
Also known as ‘Squelch defeat’. Short Press SB1 to
enable PL/DPL defeat so you can listen or monitor
any activity in the channel without noise. Press SB1
again to disable PL/DPL defeat.
Power Select
(4)
Yes Yes Yes Yes
2W
(1W Model
dependant)
Use CPS to program an SBx button to be used for
selecting the transmission power level you want for
each channel. Note: There may be power
restrictions depending on the frequency chosen in
each channel.
Features
Programmable Via
Advanced Conf.
Programmable via
CPS
Default Value Programming Tips
Display
Non-
Display
Display
Non-
Display