User's Manual
Table Of Contents
- Contents
- Safety
- Introduction
- Batteries and Chargers Safety Information
- FCC Licensing Information
- Radio Overview
- Getting Started
- Programming Features
- Troubleshooting
- Use and Care
- Frequency and Code Charts
- Motorola Limited Warranty for the United States and Canada
- Accessories
- RM Series Features Summary
- Programmable Buttons Chart
- Blank Page
- Blank Page
- Blank Page
TROUBLESHOOTING
English
57
Limited talk range
Try This...
Check for clear line of sight to improve transmission.
Wearing radio close to body such as in a pocket or on a belt decreases
range. Change location of radio. To increase range and coverage, you can
reduce obstructions, increase power. UHF radios provides greater coverage
in industrial and commercial buildings. Increasing power provides greater
signal range and increased penetration through obstructions.
Refer to See “Talking and Monitoring” on page 24.
Message not transmitted or
received
Make sure the PTT button is completely pressed when transmitting.
Confirm that the radios have the same Channel, Frequency, Interference
Eliminator Code and Scramble Code settings. Refer to “Talking and
Monitoring” section on page 24 for further information.
Recharge, replace and/or reposition batteries. Refer to “About your Li-Ion
Battery” section on page 11.
Obstructions and operating indoors, or in vehicles, may interfere. Change
location. Refer to “Talking and Monitoring” Section on page 24.
Verify that the radio is not in Scan. Refer to “Scan” on page 41 and “Nuisance
Channel Delete” on page 41.
Symptom