User's Guide
Table Of Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Informations importantes sur la sécurité
- Version du logiciel
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Charging the Battery
- Attaching the Battery‡
- Installing the Antenna
- Attaching the Accessory Connector Cover
- Installing Accessories with GCAI Connector
- Turning On Your Radio‡
- Adjusting the Volume†
- Pairing Radio with Pod and Earpiece†‡
- Pairing Radio with Mission Critical Remote Control Unit (RCU)
- Using the Carry Holster
- Tying Your Radio and Flexible Antenna to Your Body
- Identifying Radio Controls
- Identifying Status Indicators
- General Radio Operation
- Advanced Features
- Advanced Call Features
- Scan
- Call Alert Paging†‡
- Emergency Operation†‡
- Man Down†‡
- Secure Operations
- Trunking System Controls†‡
- Mission Critical Wireless - Bluetooth® -†‡
- Turning the Bluetooth On
- Turning the Bluetooth Off
- Re-Pair Timer
- Bluetooth Drop Timer
- Pairing the Bluetooth Device with Your Radio
- Indicating the Bluetooth Connection is Lost
- Turning the Bluetooth Audio On (Routing the Audio from Your Radio to the Headset)
- Turning the Bluetooth Audio Off (Routing the Audio from the Headset to Your Radio)
- Adjusting the Volume of Your Radio from Bluetooth Audio Device
- Clearing All Bluetooth Devices Information
- Programming Over Project 25 (POP 25) (ASTRO 25 and ASTRO Conventional)
- Utilities
- Flipping the Display on DRSM‡
- Controlling the Display Backlight‡
- Locking and Unlocking the Controls†‡
- Turning Voice Mute On or Off†‡
- Using the Time-Out Timer
- Using the Conventional Squelch Operation Features
- Using the Digital PTT ID Feature‡
- Using the Smart PTT Feature (Conventional Only)
- Voice Announcement†
- Helpful Tips
- Accessories
- Appendix: Maritime Radio Use in the VHF Frequency Range
- Glossary
- Commercial Warranty
Advanced Features
English
59
Locking and Unlocking the Controls†‡
You can lock your radio’s programmable buttons to avoid
inadvertent entry. This function can be preprogrammed as a
short press or long press per your request. Refer to your
qualified technician for advice.
Procedure:
1 Long press the preprogrammed Control Lock button to lock
the controls. Associated Voice announcement will be played
if preprogrammed.
2 The display shows CTRL LCK.
3 Long press again to unlock the controls. Associated Voice
announcement will be played if preprogrammed.
Turning Voice Mute On or Off†‡
You can enable and disable voice transmission, if needed.
Procedure:
1 Press the preprogrammed Voice Mute button to turn the
feature off or on.
2 The display shows momentary VMUT OFF, and a short tone
sounds, indicating that the feature is disabled. You hear
associated Voice announcement if preprogrammed.
OR
The display shows momentary VMUT ON, and a short tone
sounds, indicating that the feature is enabled. You hear
associated Voice announcement if preprogrammed.
Using the Time-Out Timer
This feature turns off your radio’s transmitter. You cannot
transmit longer than the preset timer setting.
If you attempt to do so, your radio automatically stops your
transmission, and you hear a talk-prohibit tone.
APX_3000_M1.book Page 59 Wednesday, December 5, 2012 11:04 AM