User's Guide
Table Of Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Informations importantes sur la sécurité
- Version du logiciel
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Getting Started
- Preparing Your Radio for Use
- Charging the Battery
- Attaching the Battery‡
- Installing the Antenna
- Attaching the Accessory Connector Cover
- Installing Accessories with GCAI Connector
- Turning On Your Radio‡
- Adjusting the Volume†
- Pairing Radio with Pod and Earpiece†‡
- Pairing Radio with Mission Critical Remote Control Unit (RCU)
- Using the Carry Holster
- Tying Your Radio and Flexible Antenna to Your Body
- Identifying Radio Controls
- Identifying Status Indicators
- General Radio Operation
- Advanced Features
- Advanced Call Features
- Scan
- Call Alert Paging†‡
- Emergency Operation†‡
- Man Down†‡
- Secure Operations
- Trunking System Controls†‡
- Mission Critical Wireless - Bluetooth® -†‡
- Turning the Bluetooth On
- Turning the Bluetooth Off
- Re-Pair Timer
- Bluetooth Drop Timer
- Pairing the Bluetooth Device with Your Radio
- Indicating the Bluetooth Connection is Lost
- Turning the Bluetooth Audio On (Routing the Audio from Your Radio to the Headset)
- Turning the Bluetooth Audio Off (Routing the Audio from the Headset to Your Radio)
- Adjusting the Volume of Your Radio from Bluetooth Audio Device
- Clearing All Bluetooth Devices Information
- Programming Over Project 25 (POP 25) (ASTRO 25 and ASTRO Conventional)
- Utilities
- Flipping the Display on DRSM‡
- Controlling the Display Backlight‡
- Locking and Unlocking the Controls†‡
- Turning Voice Mute On or Off†‡
- Using the Time-Out Timer
- Using the Conventional Squelch Operation Features
- Using the Digital PTT ID Feature‡
- Using the Smart PTT Feature (Conventional Only)
- Voice Announcement†
- Helpful Tips
- Accessories
- Appendix: Maritime Radio Use in the VHF Frequency Range
- Glossary
- Commercial Warranty
Advanced Features
English
49
Erasing All the Selected Encryption Keys‡
This feature allows you to erase all or selected encryption keys.
Procedure:
Use the preprogrammed Top Side button and Top button to
erase the single key in radios with the single-key option, and to
erase all keys in radios with the multikey option.
1 Press and hold the Top Side button.
2 While holding Top Side button down, press the Top
(Emergency) button.
3 The display shows PLS WAIT.
4 When all the encryption keys have been erased, the display
shows ALL ERASED.
Note: DO NOT press the Top/Emergency button before
pressing the Top Side button, unless you are in an
emergency situation as this sends an emergency
alarm.
Requesting an Over-the-Air Rekey (ASTRO Only)†‡
This feature, also known as OTAR, allows your dispatcher to
reprogram the encryption keys in your radio remotely. Your
dispatcher performs the rekey operation upon receiving a rekey
request from you.
Procedure:
1 Press and hold the preprogrammed Rekey Request button
to send the rekey request.
2 If the rekey operation fails, a bad-key tone sounds and the
display shows RKY FAIL.
Note: The rekey operation failure indicates that your radio
does not contain the Unique Shadow Key (USK). This
key must be loaded into your radio with the key-
variable loader (KVL) before the rekey request can be
sent.
Refer to your local key management supervisor for
more information.
APX_3000_M1.book Page 49 Wednesday, December 5, 2012 11:04 AM