User's Guide

English

3 The display momentarily shows Tones off, indicating that

the keypad tones are disabled.

The display momentarily shows Tones on, and you hear a

short tone, indicating that the keypad tones are enabled.

Turning Voice Mute On or Off

You can enable and disable voice transmission, if needed.

Procedure:

Press the preprogrammed Voice Mute button to turn the

feature off or on.

Follow the procedure below.

1 < or > to VMut.

2 Press the Menu Select button directly below VMut.

3 The display momentarily shows Voice mute off, and you

hear a short tone, indicating that the feature is disabled.

The display momentarily shows Voice mute on, and you

hear a short tone, indicating that the feature is enabled.

Using the Time-Out Timer

This feature turns off your radios transmitter. You cannot

transmit longer than the preset timer setting.

If you attempt to do so, the radio automatically stops your

transmission, and you hear a talk-prohibit tone.

The timer is defaulted at 60 seconds, but it can be

preprogrammed from 3 to 120 seconds, in 15-second intervals,

or it can be disabled entirely for each radio mode, by a qualified

radio technician.

Note: You will hear a brief, low-pitched, warning tone four

seconds before the transmission times out.

Procedure:

1 Hold down the PTT button longer than the preprogrammed

time. You hear a short, low-pitched warning tone, the

transmission is cut-off, and the LED goes out until you

release the PTT button.

2 Release the PTT button. The timer resets.

3 Press the PTT button to re-transmit. The time-out timer

restarts and the LED lights up solid red.