User's Manual

Advanced Features
English
114
Adjusting the Volume of the Radio from Bluetooth
Audio Device
Procedure:
With the Bluetooth audio device connected to the radio:
1 Adjust volume up/down on the Bluetooth audio device.
2 The radio display shows Volume XX, and you hear a short,
medium-pitched tone.
Viewing and Clearing the Bluetooth Device
Information
Procedure:
1 < or > to BT. Press the Menu Select button directly below
BT to access the Bluetooth feature screen.
2 U or D to Devices, once you toggle the highlight to
Devices the display shows XX connected alternates with
XX paired. Press the Menu Select button directly below
Sel to see the details.
3 The display shows No devices if there are no active
Bluetooth devices being paired or connected.
OR
If there are devices being paired or connected,
U or D
along the <Device Friendly Name> to see the status of
each device.
OR
Press the Menu Select button directly below Back to return
to the previous screen.
4 U or D to the required device, press the Menu Select
button directly below Clr.
5 The display shows <Device Friendly Name> clear?.
6 Press the Menu Select button directly below Yes to
proceed.
OR
Press the Menu Select button directly below No to return to
previous screen.
7 The display shows <Device Friendly Name> cleared to
indicate clearing is successful.
OR
You hear the radio sounds a short, low-pitched tone. The
display shows <Device Friendly Name> clear failed. The
display returns to previous screen.
8 Press the Menu Select button directly below Back to return
to the previous screen.
Note: If Re-Pair Timer is set to infinite and you clear keys on
the radio, you must clear keys on all previously paired
devices as well. (Please see your accessories manual
for further details.)


SRX_2200_M3.book Page 114 Tuesday, April 3, 2012 5:13 PM