User's Manual

29
ADVANCED RADIO
CONFIGURATION (*)
ADVANCED RADIO
CONFIGURATION (*)
(*) Enhancement feature on CLP radios. May not
be available on previous shipping radios.
Advanced Radio Configuration provides you with
the ability to view and configure the following
settings without the need to use a computer.
• Channels
• Frequencies
• Codes (CTCC/DPL)
Frequencies allows the user to select frequencies
for each channel. Codes helps minimize
interference by providing the user with a choice of
code combinations that filter out static, noise, and
unwanted messages.
Entering Advanced Radio Configuration
Mode
Available when the device is powered OFF.
Note: For Bluetooth models, makes sure the wired
accessory is connected or the Bluetooth headset is
paired before entering Advanced Radio
Configuration Mode.
1. Press the PTT, + Button and Power button
and hold for 3 to 5 seconds until you hear a
“chirp” sound and the voice prompt
“Programming Mode”.
Note: The LED Indicator starts blinking a green heartbeat.
2. Press the Menu button to change the
settings on:
• Channel (for multi-channel models)
• RX frequency
• TX frequency*
•RX code
• TX code*
Note: TX frequencies and TX codes are only available for
repeater channels.
3. The voice announcements indicate the menu
items and their current settings. To change,
press +/- button; to go to the next menu item,
press Menu button.
4. Short press PTT or wait 15 seconds to exit
the menu.
5. Press and hold the PTT button to exit the
Advanced Radio Configuration Mode.