User's Manual

Table Of Contents

Advanced Features

English

Making a Dynamic Priority Change (Conventional

Scan Only)

While the radio is scanning, the dynamic priority change feature

allows you to temporarily assign any channel in a scan list

(except for the Priority-One channel) as the Priority-Two

channel.

This change remains in effect until scan is turned off. Scan then

reverts to the preprogrammed (original) setting.

Procedure:

1 When the radio locks onto the channel designated as the

new Priority-Two channel, press the preprogrammed

Dynamic Priority button.

2 The radio continues scanning the remaining channels in the

list.

Deleting a Nuisance Channel

If a channel continually generates unwanted calls or noise

(termed a “nuisance” channel), you can temporarily remove the

unwanted channel from the scan list.

This capability does not apply to priority channels or the

designated transmit channel.

Note: Deleting a “nuisance” channel is only possible through

the preprogrammed Nuisance Channel Delete

button.

Procedure:

1 When the radio is locked onto the channel to be deleted,

press the preprogrammed Nuisance Delete button.

2 The radio continues scanning the remaining channels in the

list.

Restoring a Nuisance Channel

Procedure:

To restore the deleted nuisance channel, do one of the

following:

• Turn the radio off and then turning it on again.

• Stop and restart a scan via the preprogrammed Scan button.

• Change the channel via the 16-Position Select knob.

