User's Manual

APPENDIX A: PIU AND PICCOLO-XR SPECIFICATIONS
44
Radio Transmission
Radio Off 1.2 – 1.5 mA (See Notes 6, 7 p. 44.)
(TX power-10mW) 65 – 90 mA (See Notes 8, 9 p. 44.)
(TX power-100mW) 100 – 150 mA (See Notes 8, 9 p. 44.)
Radio Receives
30 – 40 mA (See Notes 8, 9 p. 44.)
Sleep Mode
LPM0 190 – 250 μA (See Note 7 p. 44.)
LPM3 40 – 65 μA (See Note 7 p. 44.)
Power Fail Mode
LPM3
40 – 70 μA (See Note 6 p. 44.)
Power Monitors
Power In Report
 200 mV
Power OK Voltage Service Toolkit Adjustable
Default = 6 V DC  200 mV
Low Power Voltage Service Toolkit Adjustable
Default = 5 V DC  200 mV
Very Low Battery Service Toolkit Adjustable
Default = 4.8 V DC  200 mV
Reverse Input Voltage
Connection Protected
Note 6: Power In = 4 V DC, Radio (On Board Circuits) = Off,
internal Radio is off.
Note 7: Power In = 7.8 V DC, Radio (On Board Circuits) =
Off, internal Radio is off.
Note 8: Power In = 5.5 V DC, Radio (On Board Circuits) =
On, internal Radio is On.
Note 9: Power In = 7.8 V DC, Radio (On Board Circuits) =
On, internal Radio is On.
Note 10: Apply 1.2 KHz FM signal with 2 KHz Deviation,
Sensitivity @-110 dBm to the radio, and read BER. At
extreme temperatures apply -104 dBm.