User's Manual
Table Of Contents
- DISTRIBUTED I/O SYSTEM
- CONTENTS
- INTRODUCTION
- INSTALLATION
- THE DIOS PIU AND PICCOLO-XR UNITS
- APPENDIX A: PIU and PICCOLO-XR SPECIFICATIONS
- APPENDIX B: MODELS and ACCESSORIES
- APPENDIX C: ANTENNA
- APPENDIX D: PIU/PICCOLO–XR MOUNTING TEMPLATES
APPENDIX A: PIU AND PICCOLO-XR SPECIFICATIONS
41
Note 1: Power In = 9 V DC (Adapter), RS232 = shutdown,
RS485 = disable, Radio (On Board Circuits) = off, internal
Radio is off. RS232 cable connected.
Note 2: Power Supply = 14 V DC (PIU), RS232 = shutdown,
RS485 = disable, Radio (On Board Circuits) = off, internal
Radio is off. RS232 cable connected.
Note 3: Power In = 5.4 V DC (Power fail), RS232 =
shutdown, RS485 = disable, Radio (On Board Circuits) = off,
internal Radio is off. RS232 cable connected.
Note 4: Power In = 9 V DC (Adapter), RS232 = auto
shutdown, RS485 = disable, Radio (On Board Circuits) = off,
internal Radio is off. RS232 cable connected.
Note 5: Apply 1.2 KHz FM signal with 2 KHz Deviation,
Sensitivity @–110 dBm to the radio, and read BER. At
extreme temperatures apply –104 dBm.
PICCOLO XR Specifications
Environmental
Operating Temperature
-30 C to +60 C
(-22 F to +140 F)
Storage Temperature
-40 C to +85 C
(-40 F to + 185 F)
Relative Operating
Humidity
0 to 95% without condensation
@ +50 C (122 F)
Operating Altitude -400 m to +4000 m (-1300 ft to
13,000 ft) above sea level
Housing IP66