User's Manual

Programming Mode

Make sure kis displayed. See Entering Programming Mode for instructions on

how to access.

Channel

1. The Channel number flashes and the land y indicators display

alternately.

2. Press or until the desired Channel is selected.

3. Press the Push to Talk button to exit.

Frequency

1. Press once, the lindicator displays and the Frequency flashes.

2. Press or to choose the desired Frequency.

3. Press the Push to Talk button to exit.

Interference Eliminator Code

1. Select the channel on which you wish to change the Code.

2. To set the Code, press until the Code number display begins to flash.

3. Press or to select the desired Code.

4. Press the Push to Talk button to exit.

Note: To hear everyone on your frequency, select Interference Eliminator Code 0.

operation.fm Page 15 Tuesday, August 30, 2005 1:16 PM