User's Manual

Programming Mode

In order to speak with someone on your two-way radios, the following features must

be set to the exact settings on all radios:

• Channel: The current channel that the radio is using to transmit.

• Frequency: The frequency your radio is using to transmit or receive (see page

XX).

• Interference Eliminator Code: These codes help to minimize interference by

providing you with a choice of code combinations (see page XX).

Entering Programming Mode

Once in Programming Mode, the radio beeps and displays k.

Note: If you press and release the

Push to Talk

button when programming, you will exit

Programming Mode.

To Do This

Press These Buttons While Turning

the Radio ON

Channel

Push to Talk button and

Frequency

Push to Talk button and

Interference Eliminator Code

(this will disable “End of Transmission Tone”

MON

operation.fm Page 14 Tuesday, August 30, 2005 1:16 PM