User's Manual

Troubleshooting

Symptom Try This:

No Power

Reposition, recharge or replace NiMH battery pack.

Message not

transmitting

Make sure the

Push to Talk

button is completely pressed while

transmitting.

Reposition, recharge, replace the NiMH battery pack.

Message not

received

Confirm that all radios have the same channel, frequency, and

interference eliminator code settings.

Make sure that the Push to Talk button is not inadvertently

being pressed. Reposition, recharge, or replace the NiMH

battery pack.

Obstructions and operating indoors or in vehicles may interfere -

change location.

Hearing

conversation or

noise on a

channel

Check that the Interference Eliminator Code setting is not set to

0. A shared channel may be in use, try another.

operation.fm Page 26 Tuesday, August 30, 2005 1:16 PM