User's Manual

Installation
The Piccolo–XR unit can be attached to any vertical or horizontal
surface using screws. Before mounting the Piccolo–XR, verify that
sufficient clearance is left around the unit. Allow 7.87" (20 cm)
clearance off the bottom of the Piccolo–XR case for the TB
connectors and 6.3" (16 cm) off the top of the unit for the flexible
antenna.
Piccolo–XR Screw Mounting Options
Mount the Piccolo–XR on a vertical surface as follows:
Secure the unit to any vertical surface using one 0.35"
(9 mm) maximum head screw. Use the mounting hole
marked A in Figure 14 to attach it to the mounting surface.
See figure 15 B.
Mount the Piccolo–XR on a horizontal surface as
follows:
Secure the unit to any horizontal surface using two 0.35"
(9 mm) maximum head screws. Use the mounting holes
marked B and C in Figure 14 to attach it to the mounting
surface. See Figure 15 A.
Mount the Piccolo–XR on a wide plane as follows:
Secure the unit to any plane using three 0.35" (9 mm)
maximum head screws. Use all three mounting hole marked A,
B and C in Figure 14 to attach it to the mounting surface. See
figure 15 C.
20